|
||
Partners
Future Cars
Company Information
Legal Statement | Privacy Policy | Advertise With Us | Contact Us
©2010 10w40.com. All rights reserved. Use of this site constitutes acceptance of 10w40.com's terms of service and privacy policy. The material on this site is for informational and educational purposes only.
the speed sensor must have got compermized. check the wiring by the hub. check that the hub nut is tight enogh. it stopped kicking in because the bcm shut the abs off. if you donn't see any thing wrong with wiring, you should get the code read. a cheap scan tool will not read it. at worest you'll need a new hub. let us know. mws919
UPDATE: Had the ABS read today - comes back that either the hub is bad or it's the harness. I've switched out the hub 2 times already, but good news is it's lifetime warrantied. We will try this a 3rd time. Could this have any effect to the 4x4 I've been having challenges with changing from 2Hi to 4x4 by itself?
did u clean the sensor? or possibly damage it when u made the change?
check the wiring going to the front axle.
ABS reader says sensor is bad.