how do i install new power steering pump on 84 olds delta 88

get a good manual if you want to work on your car - it will save money and give step by step with pics = remove drive belt, empty reservior, remove hoses and mount bracket bolts.

try autozone.com free repair guides login to use this feature

First you need to take the belts off and remove the power steering lines. There is a bolt behind the pump that is hard to get at to loosen the belt. Then find the brackets and blots that hold the pump on and take them off. When everything is unbolted it should come off. Put everything back the way it come off. It really shouldn't be more then 3-4 bolts if I remember correctly. To retighten the belt I use a pry bar and get on the side of the pump and pry up using the motor as a brace. Careful not to puncture the pump. There may be an easier way but this works. It's a lot easier if there is 2 people to do this so you get the belt tightend correctly.

Bolts
There are two bolts that hold it on behind the pulley. One is located at approximatetly the 1 oclock position and the other at 6. You can access them through the access ports in the power steering pump pulley.

answer is from: http://wiki.answers.com/Q/How_do_you_change_the_power_steering_pump_on_an_'83_Delta_88_Oldsmobile