Auto Repair Q&A

Popular

Engine

Cooling System

Brakes

Suspension

Transmission

Exhaust/Emissions

Electrical

Body

Interior

Understand

Directory

Auto Repair Products

how do you put on a water pump for a chrysler voyager 2002


Before servicing the



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Drain the cooling system.

  4.  
  5. Remove or disconnect the following:



    Negative battery cable

     

    Right inner splash shield

     

    Accessory drive belts

     

    Right motor mount and bracket, support the engine from below before removing the mount

     

    Front cover

     

    Timing belt.

     

    Timing belt idler pulley

     

    Camshaft sprockets

     

    Timing belt rear cover

     

    Alternator and bracket

     

    Water pump

     


  6.  


To install:

  1. Install or connect the following:



    Water pump with a new O-ring gasket. Tighten the bolts to 105 inch lbs. (12 Nm). Rotate the pump by hand to make sure it moves freely.

     

    Timing belt rear cover

     

    Camshaft sprockets. Tighten the bolts to 75 ft. lbs. (101 Nm).

     

    Timing belt idler pulley. Tighten the bolt to 45 ft. lbs. (61 Nm).

     

    Timing belt

     

    Front cover

     

    Alternator and bracket

     

    Right motor mount

     

    Accessory drive belts

     

    Right inner splash shield

     

    Negative battery cable

     


  2.  
  3. Fill the cooling system.
  4.  
  5. Start the engine and check for leaks.
  6.  


3.0L Engine




  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Drain the cooling system.
  4.  
  5. Remove or disconnect the following:



    Negative battery cable

     

    Right inner splash shield

     

    Accessory drive belts

     

    Right motor mount

     

    Front cover

     

    Timing belt.

     

    Water pump

     


  6.  


To install:

  1. Install or connect the following:




    Water pump. Tighten the bolts to 20 ft. lbs. (27 Nm).

     

    Timing belt

     

    Front cover

     

    Right motor mount. Tighten the frame rail bolts to 50 ft. lbs. (68 Nm), the vertical fastener to 75 ft. lbs. (102 Nm) and the horizontal fastener to 111 ft. lbs. (150 Nm).

     

    Accessory drive belts

     

    Right inner splash shield

     

    Negative battery cable

     


  2.  
  3. Fill the cooling system.
  4.  
  5. Start the engine and check for leaks.
  6.  


3.3L & 3.8L Engines




  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Drain the cooling system.
  4.  
  5. Remove or disconnect the following:

    NOTE
    To remove the water pump it must be positioned between the pump housing and the drive hub. Refer to the accompanying illustration for further clarification.






    Negative battery cable

     

    Right inner splash shield

     

    Accessory drive belt

     

    Water pump pulley bolts

     






    Water pump with the pulley loosely positioned between the hub and pump body


    Click image to see an enlarged view

    Fig. The water pump must be positioned between the pump housing and the drive hub so it can be removed-3.3L and 3.8L engines

     


  6.  


To install:

  1. Install or connect the following:



    New seal into the water pump housing groove

     

    Water pump with the pulley loosely positioned between the hub and pump body. Tighten the bolts to 105 inch lbs. (12 Nm).

     

    Water pump pulley and tighten the bolts to 250 inch lbs. (28 Nm). Rotate the pump by hand to make sure it moves freely.

     

    Accessory drive belt

     

    Right inner splash shield

     

    Negative battery cable

     


  2.  
  3. Fill the cooling system.
  4.  
  5. Start the engine and check for leaks.


Auto Repair Q&A Contest

Win Cash!

Participate in the 10w40.com Q&A community to win cash prizes!

win cash prizes

Congratulations to our March Winners!

How To Play

 

Top Contributors: 2 weeks