Auto Repair Q&A



Cooling System










Auto Repair Products

how to replace right rear wheel bearing on a 1998 rav4

here's the service info, no

here's the service info, no pics, they donn't post here, if needed post email and i'll send them. let me know. mws919


Remove rear wheel. Torque: 103 Nm (76 ft. lbs.)
Remove brake drum.

Check bearing backlash and axle hub deviation.
Using a dial indicator near the center of the axle hub and check the backlash in the bearing shaft direction. Maximum: 0.05 mm (0.0020 inch) If the backlash exceeds the maximum, replace the bearing.
Using a dial indicator, check the deviation at the surface of the axle hub outside the hub bolt. Maximum: 0.07 mm (0.0028 inch) If the deviation exceeds the maximum, replace the axle shaft and bearing.
Remove bolt and ABS speed sensor. Torque: 7.8 Nm (69 inch lbs.)
Remove rear drive shaft.
Disassemble rear brake.

Disconnect brake line. Using Special Service Tool (SST) 09023 - 00100 or equivalent, disconnect the brake line from the wheel cylinder. Torque: 15 Nm (11 ft. lbs.)

Remove rear axle hub with backing plate.
Remove the 2 bolts and disconnect the parking brake cable. Torque: 7.8 Nm (69 inch lbs.)
Remove the 4 bolts and rear axle hub. Torque: 80 Nm (59 ft. lbs.)
Installation is in the reverse order of removal. After installation, bleed the brake system and check for leaks.

Auto Repair Q&A Contest

Win Cash!

Participate in the Q&A community to win cash prizes!

win cash prizes

Congratulations to our September Winners!

How To Play


Top Contributors: 3 weeks