Free Repair Information and Great Prices from Autozone
Online Auto Repair Manuals - Brakes Repair
ALLData has online auto repair manuals available for most makes and models. Click here to get yours now!
Related Articles
-
Window Tint Laws and Enforcement
Many states and even counties have laws that limit the amount of window tinting allowed on a vehicle. Some limit on…
-
Sometimes, the turbocharger on a car might go bad. Warning signs include high-pitched whining, poor performance (not accompanied by fuel system probl…
-
In the window tinting industry and the laws that surround it, window tint on a vehicle is usually measured by a percentage number. Most often, this i…
-
Likely the most important installation concern when replacing cylinder heads, due to a gasket change or warping, is proper torque in the proper sequen…
Related Videos
-
This video shows you how to properly change your vehicle wiper blades.
More Videos
…
-
Learn how you can change your own windshield wiper blades
More Videos
…
-
This video shows you how to check if your oil pump is working properly.
More Videos
…
Latest Questions
First check the fuse and/or
First check the fuse and/or relays associated with windshield wipers.
If good, unplug the wiper motor's electrical plug, use a test light to check for power to the wiper motor when the wiper switch is turned on. If power is present, check for a good ground.
If there is good power when the switch is on and a good ground, but motor still doesn't work, replace the motor.
The relay is a 6 Amp Circuit
The relay is a 6 Amp Circuit Breaker.
How can I test the Relay to see if it good?
Thanks
The easiest way to check a
The easiest way to check a circuit breaker is to bypass it with a jumper wire. Your jumper wire should have a replaceable inline fuse to protect the circuit against damage. Use a fuse of no greater capacity than what the circuit itself uses. If you do not know, use a 5- or 10-amp fuse to be safe. If the circuit works when you bypass the circuit breaker, you have isolated the problem. Replace the circuit breaker.
I have replaced the wiper
I have replaced the wiper motor and wiper switch.
Now the wipers come on SOMETIMES. Not all the time.
When I turn off the wipers the wiper blades stop anywhere and don't go all the way down.
What could be the problem?